Hogtunes

 NOTE: For models with factory “hard” saddlebags.

• Complete kit with 225-watt amp and XL series 5-1/4" front speakers
• Includes metal mesh grills
• Includes amplifier with R.E.M.I.T. for excellent FM reception from a Class D amp
• Features carbon fiber woofer cone and titanium impregnated 1” tweeter
• 100% plug and play wiring is included
• Not compatible on CVO models with factory amplifiers installed

• Features three small front pouches and one large zippered pouch
• Made by Saddlemen

• Bluetooth receiver easily hides inside fairing
• Can be “stuck” using supplied adhesive or “zip tied” in place
• Features track skip, play/pause, etc. device controls for streaming music
• 90° audio connector plugs into aux port on front of factory radio on '98-'13 model bikes
• Supplied power wires plug into factory cigarette lighter wires on all '99-'13 touring bikes
• Can be used on any 12v vehicle requiring bluetooth receiver

• Complete kit with dual 225-watt amps and front and rear XL Series 5.25” speakers
• Includes metal mesh grilles for front speakers (PART #4405-0379)
• Amplifiers feature R.E.M.I.T. circuitry for excellent FM reception from a class D amp
• All required plug-and-play wiring and mounting hardware to complete installation is included
• Compatible with HD specific aftermarket radios
• Not compatible on CVO models with factory amplifiers installed

• Complete front and rear speaker kit with 300-watt, 4-channel amp
• Amp features cast aluminum 3D design providing exceptional heat management and thermal performance in high heat climates
• New shape fits seamlessly inside the fairing of FLH and FLTR models for easy install
• Features proprietary R.E.M.I.T. circuitry which gives superb FM reception from a class D amp
• 100% plug-n-play and includes all required hardware to complete installation
• System is easily expandable
• No radio reflash is required

• Kit includes High-Impact ABS replacement saddlebag lids, lid tethers, grilles, grommets, wire harness and required hardware
• Disassembles easily for paint
• Accepts OEM and aftermarket latches
• Required amplifier and optional speakers are not included.

• Hogtunes - PLUG & PLAY Wire Harnesses

• Kit includes High-Impact ABS replacement saddlebag lids, lid tethers, grilles, grommets, wire harness and required hardware
• Disassembles easily for paint
• Accepts OEM and aftermarket latches
• Required amplifier and optional speakers are not included.

• Speakers angled toward rider for best sound
• Includes 200 watt 2 ohm XL Series 6x9” speakers made for motorcycle environment
• Speakers feature carbon fiber woofer cones, better bass response and allow for higher power handling
• Includes High quality/high impact ABS replacement saddlebag lids
• Factory latch/lock mechanism bolts into new lids
• Built-in water drainage system keeps everything dry
• Comes matte black, primed and ready for paint
• Metal mesh grills, gaskets, grommets, wire harness and all required hardware is included
• Included wire harness will plug into any current Hogtunes amp or other amp
• An amplifier is required for proper operation

• Speakers angled toward rider for best sound
• Includes 200 watt 2 ohm XL Series 6x9” speakers made for motorcycle environment (200 Watts per speaker)
• Built-in water drainage system keeps everything dry
• High quality/high impact ABS replacement saddlebag lids
• Comes matte black, primed and ready for paint
• Metal mesh grills, gaskets, striker plates, grommets, wire harness and all required hardware is included
• Included wire harness will plug into any current Hogtunes amp or other amp
• Works with OEM and most aftermarket latches

• 200-watt, 4-channel amplifier (50W x 4)
• Works best with 2 ohm speakers
• Pretuned to factory radio, so zero adjustments are required, making installation very simple
• All required wiring to complete installation is included in the kit
• 100% plug-n-play

• Outer fairing does not have to be removed to change grills
• 1mm thick metal mesh grills come painted gloss black
• Metal Mesh can be power coated, chromed, polished or painted
• Grills are thick enough not to warp during finishing process
• No corporate logos on grills
• Can be used with most replacement speakers

• Direct replacement speakers for 86-96 model bikes equipped with factory radios
• Fit behind factory grilles, includes 10mm soft rubber gaskets for an improved fit
• 4.25" speakers, 4 ohm, 2-way design
• Feature Hogtunes "signature" sound to enhance sound on a bike at speed
• Install using factory hardware
• Can be used on bikes with a car radio conversion kit

• 1mm thick metal mesh that comes painted semi-gloss black
• Metal mesh is thick enough to withstand painting, powder coating, polishing, etc.
• Replace the stock front speaker grill cloth for a much nicer look
• Metal mesh is thick enough not to warp during finishing processes

• 1mm thick metal mesh that comes painted semi-gloss black
• Metal mesh is thick enough to withstand painting, powder coating, polishing, etc.
• Replace the stock front speaker grill cloth for a much nicer look
• Metal mesh is thick enough not to warp during finishing processes

• 1mm thick metal mesh that comes painted semi-gloss black
• Metal mesh is thick enough to withstand painting, powder coating, polishing, etc.
• Replace the stock front speaker grill cloth for a much nicer look
• Metal mesh is thick enough not to warp during finishing processes

• Included wiring is labeled to make connections to car radios easy
• Makes adding speakers to a tour pack easy
• Vinyl covering closely matches stock finish for an OEM look

• 150 Watt XL Series 5.25” RearSpeaker
• Features multiple neodymium magnets for increased bass and power handling
• Features studio quality polystyrene capacitors for crossover
• XL Model speakers work best when used with an amplifier
• Speakers offer superior bass response and overall better sound, especially at riding speeds
• Features carbon fiber woofer cone and titanium impregnated 1” tweeter
• Easy plug & play installation

• Hogtunes - Introducing Hogtunes XL

• Mesh separates easily from trim for painting, powdercoating, polishing, etc
• Feature 1mm thick mesh
• Grilles can be used with most brands of speakers

• Allows easy
• access to factory radios with built-in rear speaker outputs
  
• Plugs directly into empty 35 pin socket on 06-13 factory Harmon Kardon radios
• Wires are clearly labelled for easy installation
• This plug accesses the speaker leads of the radio but does not activate your radio's built-in fader control. To have your fader enables, you must go to a H-D® dealer and have your radio "reflashed."

• Replace your stock rear fabric grills for a more custom look
• Can be used to replace worn or faded factory grills
• Can be used with most replacement speakers
• 1mm thick metal mesh grills come painted gloss black
• Nice custom trim around mesh
• Improved high frequency compared to the restrictive factory cloth grill

• Included wire harness will plug into all Hogtunes amplifiers except USA 24.2
• Includes 2 ohm 7" woofers, grilles and all required hardware

• Complete add-on tweeter kit
• Doubles as a fairing accent piece with decorative chrome trim (included)
• Disassembles easily to paint-match custom-painted fairings
• Black "see through" grilles can also be painted or chromed
• Second set of cloth covered grilles included
• Works with all Hogtunes speaker systems, 98-13 stock systems or bikes with aftermarket car radios
• Includes custom-designed 50 watt (RMS) high-efficiency metalized dome tweeters with 3rd order (18 dB) passive crossovers
• Radically improves clarity and performance of your audio system
• All mounting hardware, drilling template and plug-and-play wiring is included in box

• Feature vented magnets for increased power handling
• 2 ohm styles feature an all-new 1" titanium tweeter dome for smoother highs
• New technologies give more bass response than previous models
• Conservatively rated at 100 watts RMS power handling

• Feature vented magnets for increased power handling
• Includes metal mesh speaker grilles
• 2 ohm, conservatively rated at 100 watts RMS power handling
• Not compatible with CVO models with factory amplifiers installed.

• Complete kit with speaker adapters, grilles, 2 ohm speakers and all required wiring to go in fairing lowers on liquid-cooled bikes
• Includes all required hardware and wiring to complete the installation
• Required amplifier is not included.

• Carbon fiber woofer cones
• Similar to Wild Boar Audio but for ‘98-’13 Bikes
• Oversized vented magnet controls heat for added reliability
• Better bass response and sound quality compared to 352F-AA speaker
• Studio grade crossover components
• Rated at 150 Watts RMS, 2 Ohm resistance
• Metal mesh grills included
• Works best with a 2 ohm stable amplifier

• Hogtunes 352-XLF Speaker Install in Street Glide