Products

• Includes GEN 3 5-1/4" front and rear speakers and 200-watt, 4-channel amplifier
• 100% plug-n-play wire harness
• Supplied mounting bracket holds amp above radio and relocates accessory modules on 2006-2013 bikes
• Comes with everything required to complete installation
• Not compatible with CVO models with factory amplifiers installed

Hogtunes - PLUG & PLAY Wire

• Complete kit with 225-watt amp and Gen 4 6-1/2" front speakers
• Included mounting plate to easily add a second amp
• Features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp
• No radio flash is required
• Includes Hogtunes model specific replacement metal mesh grilles
• All required plug-and-play wiring and hardware to complete the installation is included
• Not compatible with CVO models with factory amplifiers installed

• Complete kit with 225-watt amp and Gen 4 6-1/2" front speakers
• Included mounting plate to easily add a second amp
• Features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp
• No radio flash is required
• Includes Hogtunes model specific replacement metal mesh grilles
• All required plug-and-play wiring and hardware to complete the installation is included
• Not compatible with CVO models with factory amplifiers installed

• Includes GEN3 front speakers and 225-watt, 2 channel amplifier
• Kit comes with everything required to complete installation
• Features R.E.M.I.T circuitry for excellent FM reception from a Class D amp
• 100% plug-and-play harness included
• Not compatible with CVO models with factory amplifiers installed

• 225-watt, 2-channel fairing mounted amplifier (112.5W x 2 RMS @ 2-ohms)
• Features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp
• 100% plug-and-play with supplied wire harnesses
• Not compatible with CVO models with factory amplifiers installed
• Part #4405-0234 required if this is the second amp on FLH models
• Part #4405-0486 required for FLTR applications

• Hogtunes REV 225-AA Amp Install In Street Glide

• 225-watt, 2-channel fairing mounted amp (112.5W x 2 @ 2-ohms)
• Features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp
• No radio flash is required
• Includes mounting plates for Batwing and Road Glide fairings

• Features R.E.M.I.T. circuitry for excellent FM reception from a Class D amp
• No Radio reflash required
• 100% plug and play wiring and everything needed to complete installation is included
• Allows for easy system expansion

• Gen 4, 5.25” 6-ohm speaker fits front and rear locations
• Vented magnet properly controls heat for added reliability
• Compatible with popular plug-and-play aftermarket radios
• Sound is tailored to cut through exhaust and wind noise
• Install using factory grilles or use Hogtunes front speaker metal mesh grilles part # 4405-0379, (sold separately)

• Gen 4 features improved bass and clarity over Gen 3 models
• New black speaker cones for better cosmetics
• 125-watt RMS/ 200 peak watts
• Custom-tooled speaker basket requires no cutting or grinding for install
• Includes very clean-looking, sturdy metal mesh grilles
• Factory grilles can also be used

• Mounts 2-channel amp between radio and brake side speaker in '98-'13 FLH models
• Ideal for mounting second Hogtunes amplifier
• Kit includes steel mounting plate and all required hardware
• When aftermarket fairing support brackets are used some modification to the plate may be necessary

• Hogtunes - Wiring a Second Amp To Your Bike

• Gen 4 features Improved bass and clarity over Gen 3 models
• Black speaker cone for better cosmetics when supplied grill is used
• 125 watt RMS/200 peak watts
• Custom-tooled speaker basket requires no cutting or grinding for install
• Include very clean-looking, sturdy metal mesh grilles with no corporate logos
• Supplied FLHT-style metal mesh or factory grilles can be used

• Complete kit with speaker adapters, grilles, 2 ohm speakers and all required wiring to go in fairing lowers on liquid-cooled bikes
• Includes all required hardware and wiring to complete the installation
• Required amplifier is not included.

• Feature vented magnets for increased power handling
• Includes metal mesh speaker grilles
• 2 ohm, conservatively rated at 100 watts RMS power handling
• Not compatible with CVO models with factory amplifiers installed.

• Feature vented magnets for increased power handling
• 2 ohm styles feature an all-new 1" titanium tweeter dome for smoother highs
• New technologies give more bass response than previous models
• Conservatively rated at 100 watts RMS power handling

• Feature vented magnets for increased power handling
• 2 ohm styles feature an all-new 1" titanium tweeter dome for smoother highs
• New technologies give more bass response than previous models
• Conservatively rated at 100 watts RMS power handling

• Hogtunes - PLUG & PLAY Wire Harnesses

• Complete add-on tweeter kit
• Doubles as a fairing accent piece with decorative chrome trim (included)
• Disassembles easily to paint-match custom-painted fairings
• Black "see through" grilles can also be painted or chromed
• Second set of cloth covered grilles included
• Works with all Hogtunes speaker systems, 98-13 stock systems or bikes with aftermarket car radios
• Includes custom-designed 50 watt (RMS) high-efficiency metalized dome tweeters with 3rd order (18 dB) passive crossovers
• Radically improves clarity and performance of your audio system
• All mounting hardware, drilling template and plug-and-play wiring is included in box

• Adds Bluetooth® capability through factory radio AUX input
• Replaces factory ambient air temperature gauge
• Easy plug-and-play installation
• Additional input for satellite radio/GPS, etc.
• H-D accessory chrome rings fit perfectly
• Backlights for easy viewing at night
• Works with any radio that has 1/8" input
• Ability to pair with up to nine wireless devices

• Hogtunes BTS AA Wireless Music Controller
• Hogtunes - PLUG & PLAY Wire

• Included wire harness will plug into all Hogtunes amplifiers except USA 24.2
• Includes 2 ohm 7" woofers, grilles and all required hardware

• Replace your stock rear fabric grills for a more custom look
• Can be used to replace worn or faded factory grills
• Can be used with most replacement speakers
• 1mm thick metal mesh grills come painted gloss black
• Nice custom trim around mesh
• Improved high frequency compared to the restrictive factory cloth grill

• Allows easy
• access to factory radios with built-in rear speaker outputs
  
• Plugs directly into empty 35 pin socket on 06-13 factory Harmon Kardon radios
• Wires are clearly labelled for easy installation
• This plug accesses the speaker leads of the radio but does not activate your radio's built-in fader control. To have your fader enables, you must go to a H-D® dealer and have your radio "reflashed."

• Mesh separates easily from trim for painting, powdercoating, polishing, etc
• Feature 1mm thick mesh
• Grilles can be used with most brands of speakers

• 150 Watt XL Series 5.25” RearSpeaker
• Features multiple neodymium magnets for increased bass and power handling
• Features studio quality polystyrene capacitors for crossover
• XL Model speakers work best when used with an amplifier
• Speakers offer superior bass response and overall better sound, especially at riding speeds
• Features carbon fiber woofer cone and titanium impregnated 1” tweeter
• Easy plug & play installation

• Hogtunes - Introducing Hogtunes XL

• Included wiring is labeled to make connections to car radios easy
• Makes adding speakers to a tour pack easy
• Vinyl covering closely matches stock finish for an OEM look

• 1mm thick metal mesh that comes painted semi-gloss black
• Metal mesh is thick enough to withstand painting, powder coating, polishing, etc.
• Replace the stock front speaker grill cloth for a much nicer look
• Metal mesh is thick enough not to warp during finishing processes

• 1mm thick metal mesh that comes painted semi-gloss black
• Metal mesh is thick enough to withstand painting, powder coating, polishing, etc.
• Replace the stock front speaker grill cloth for a much nicer look
• Metal mesh is thick enough not to warp during finishing processes

• 1mm thick metal mesh that comes painted semi-gloss black
• Metal mesh is thick enough to withstand painting, powder coating, polishing, etc.
• Replace the stock front speaker grill cloth for a much nicer look
• Metal mesh is thick enough not to warp during finishing processes

• Direct replacement speakers for 86-96 model bikes equipped with factory radios
• Fit behind factory grilles, includes 10mm soft rubber gaskets for an improved fit
• 4.25" speakers, 4 ohm, 2-way design
• Feature Hogtunes "signature" sound to enhance sound on a bike at speed
• Install using factory hardware
• Can be used on bikes with a car radio conversion kit